For Furniture Manufacturing
01/05
Veneer delivers the look of solid wood furniture at a lower weight and with less risk of warping. It bonds readily to panel materials and takes stain and lacquer well, keeping the surface stable.
ALOM has been producing natural veneer since 2013. Our products are used by partners in 27 countries to manufacture furniture, doors, and wall panels, as well as to create modern and classic interior solutions.
In the ALOM catalog you'll find various veneer categories and popular wood species: beech, white oak, and red oak. Below you can learn about the material's features, choose the right type, and proceed to the catalog.
Veneer is a thin layer of natural wood used for facing surfaces. Thanks to its strength and flexibility, it is widely applied across construction, furniture making, and interior design.
Veneer preserves the natural look of wood — its texture, tone, grain direction, and the figure characteristic of each species.
Used for facades, doors, panels, furniture parts, and surfaces meant to look like natural wood.
For your project we can select the species, cut type, tone, figure, format, and grade of veneer.
Beech veneer has a light, warm tone ranging from creamy white and pale yellow to soft pink or light beige. It is chosen where a restrained, natural grain pattern without sharp contrast is required.
White oak veneer stands out for its light, refined tones — from near-white and pale straw to light beige or soft honey. It forms an elegant grain pattern and is considered one of the most valuable wood species.
Red oak veneer has a pronounced grain that gives surfaces depth and texture. Its colors range from light brown and golden beige to reddish-brown tones, giving the veneer a warm, saturated appearance.
Veneer produced by slicing wood into thin sheets. This cutting method faithfully conveys the natural grain figure, texture, and tone of the species. Suited to surfaces where appearance and face-layer quality matter.
Applications
01/05
Veneer delivers the look of solid wood furniture at a lower weight and with less risk of warping. It bonds readily to panel materials and takes stain and lacquer well, keeping the surface stable.
02/05
Gives door leaves, casings, baseboards, and stair components the look of natural wood, with better dimensional stability and more efficient use of timber. The material is easy to machine.
03/05
Veneer for facing wall panels, ceilings, built-in structures, and other elements gives a space a premium finish. It supports both contemporary minimalist and classic design schemes.
04/05
Veneer for souvenirs, musical instruments, accessories, boxes, lighting elements, and similar one-off pieces that combine aesthetics, function, and responsible use of timber resources.
05/05
Narrow veneer for edges, end grain, and other furniture components, matching surfaces seamlessly for a solid-wood effect. Good adhesion, with grain and tone matched to the face.
Sliced veneer, European oak (white)
A-AB-B
0.50 mm
Sliced veneer, European oak (white)
A-AB
0.50 mm
Sliced veneer, European oak (white)
B
0.50 mm
Sliced veneer, European oak (white)
C
0.50 mm
Sliced veneer, European oak (white)
Width 9-11 MIX
0.50 mm
Sliced veneer, European oak (white)
Backing
0.50 mm
Sliced veneer, steamed beech
A-AB-B
0.50 mm
Sliced veneer, steamed beech
A-AB
0.50 mm
Sliced veneer, steamed beech
B
0.50 mm
Sliced veneer, steamed beech
C
0.50 mm
Sliced veneer, steamed beech
Backing
0.50 mm
Sliced veneer, red oak
A-AB-B
0.50 mm
Sliced veneer, red oak
A-AB
0.50 mm
Sliced veneer, red oak
B
0.50 mm
Sliced veneer, red oak
C
0.50 mm
Sliced veneer, red oak
C-White
0.50 mm
When the standard catalog does not cover your project's requirements, ALOM can produce veneer to your own specification.
We reply within 24 hours
We bring in the technical team when needed
We find a solution for your request
Need samples, technical specifications, or product advice? Send us a message and the ALOM team will help you work out the right plywood or veneer parameters for your task.