Your project starts with the wood you choose. ALOM produces sliced and rotary-cut veneer from your own raw material, or helps you select the species that matches your production requirements. You define the specification — we deliver it precisely.
What the Service Includes
You define the material and the characteristics — we deliver the finished veneer.
Your requirements
Wood species, cutting method, dimensions, thickness and grade are all set to match your project.
Full production cycle
From raw material preparation to finished veneer sheets — every stage runs in our own facility.
Two technology options
We produce both sliced and rotary-cut veneer, depending on the application and what your project needs.
Controlled characteristics
Every batch meets the agreed parameters for geometry, surface quality and other technical characteristics.
What the Service Includes
Wood species
Alder, ash, oak, beech or another species by agreement.
Production method
Sliced veneer (crown or quarter cut) or rotary-cut veneer.
Format and thickness
The sheet dimensions your production requires.
Raw material
Your own logs, lumber, or wood supplied by ALOM.
Order volume
The minimum volume depends on the wood species and the production technology.
The cutting method defines how the finished product will look. Decorative furniture and doors usually call for sliced veneer with its different cut types, while rotary-cut veneer is the optimal solution for plywood and technical products.
Produced by continuously peeling the log. It yields large sheet formats and makes the most efficient use of the wood.
Slicing along the growth rings creates a pronounced wavy figure that brings out the natural texture of the wood.
Slicing perpendicular to the growth rings forms an even, straight-line pattern with a more restrained aesthetic.
Modern equipment and control over every production stage let us make veneer of consistent quality, however demanding the project. We work with precise machine settings and hold to the technical parameters agreed with you.
We use professional woodworking lines for precise slicing, peeling and calibration of veneer.
A full production cycle ensures consistent product quality and control over every batch.
We check geometry, thickness, surface quality and conformity to the specification before shipment.
We reply within 24 hours
We bring in the technical team when needed
We find a solution for your request
Need samples, technical specifications, or product advice? Send us a message and the ALOM team will help you work out the right plywood or veneer parameters for your task.
You can send logs or sawn timber. Our team assesses the wood species, dimensions, quality, moisture content and suitability for processing before anything goes into production.
Yes. The raw material stays yours throughout the process and is never mixed with other wood. You send your own material and receive veneer made from exactly that.
ALOM can produce sliced or rotary-cut veneer. Which one depends on the wood species, the condition of the raw material, the format and thickness required, and how the material will be used.
Include the wood species, the type of raw material, the approximate volume, the veneer type you want, the thickness, the sheet format, the surface requirements and the intended use. That lets us assess feasibility, lead time and cost faster.
The minimum volume depends on the wood species, the condition of the raw material and the production technology chosen. It can be agreed separately once the material has been assessed.
Lead time depends on the order volume, the wood species, the condition of the raw material, the veneer type, the parameters required and current production load. Indicative dates can be set once the specification is agreed.
ALOM runs separate production lines for sliced and rotary-cut veneer, works to agreed parameters and controls quality at the key stages. You get veneer produced to a specific specification, not just raw material processing.